Forum - Banjo Ben Clark

Snark Tuner Mount - Tip Fix

#1

Hi Guy’s

Just wanted to share a tip with y’all. If you own a Snark Tuner…

Lately my tuner kept slipping off the ball mount every time I turn on/off my tuner. I just ordered a couple of 10mm rubber O Rings to slip over the cap on the back of the tuner to add a little pressure to the socket… These seem to do the trick although in hindsight I should have ordered a couple more. Two rings add just enough tension to hold the tuner in place but four or five would be better. I bought the O rings online for a few cents… Works well with the Snark clip on mount from the General Store.

7 Likes
#2

Good thinking! I have the same problem and was trying to come up with ideas to resolve it. Is it 10mm outside or inside diameter?

#3

Outside I think @ChrisWms The rubber isn’t very thick so you want the O rings stretch a little.

1 Like
#4

Thanks Archie.

1 Like